Handy Home Products 19948-6 Manuel d'instructions télécharger pdf (Page 7)

San Marino

FLUSH

Gusset Bracket

(8) 1-5/8"

Screws into

each Gusset

VIEW FROM OUTSIDE

VIEW FROM INSIDE

Gap may vary in

between Gussets

2-1/2"

(6.3cm)

Rough sawn

Cedar side

facing down

INSTALLING

GUSSET

BRACKETS

❑ 8 pcs. Plywood Gusset Bracket

3-A

Install Gusset Brackets with Rough sawn Cedar

side facing down using eight 1-5/8” screws for each

Gusset. Make sure that the Gusset Bracket is flush

to the inside of the Wall Panel and that the inside

corner is directly over inside corner of Wall Panel

as shown in Fig. 1. The Gusset Bracket should

overhang the outside edge of the Wall Panel by 2-

1/2” as shown in Fig. 2. This step may require

some pulling of the Wall Panel to bring it into

proper position. Tip to tip measurement on Gus-

sets is 46-7/8” for 10’ Gazebo and 46-3/8” on 12’

Gazebo and 46” for 14’ Gazebo. The gap between

Gussets may vary.

3-A:

Fig.1

Fig.2

PARTS LIST 10’ GAZEBO

PARTS LIST 12’ GAZEBO

❑ 10 pcs. Plywood Gusset Bracket

❑ 12 pcs. Plywood Gusset Bracket

PARTS LIST 14’ GAZEBO

Note: Use wood glue (not included)

between Wall Panels and Gussets

for added strength and to meet

some local building codes. Tempo-

rarily install all gussets with 1-5/8”

screws to align walls. Remove one

gusset, apply glue, install all

screws. Continue for all Gussets.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Handy Home Products 19948-6 Manuel d'instructions Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Jouets et accessoires Handy Home Products 19948-6